Description
DELTA 15
MUST CALL FOR BEST PRICE
-
SYSTEM CONFIGURATION
- System Type: 15-inch two-way, self-powered, horn-loaded HF
-
ACOUSTIC PERFORMANCE
- Frequency Range (-10 dB): 41-20kHz
- Frequency Response (+/-3 dB): 50–19kHz
- Maximum Peak SPL (Measured): 134 dB @ 1m
- Coverage Pattern (Averaged): 90° H x 60° V
- Directivity Index (D.I.): 9.5 dB
-
POWER AMPLIFICATION
- Peak Power: 2400 watts (1600 watts LF + 800 watts HF)
- Continuous Power: 1200 watts (800 watts LF + 400 watts HF)
- Amplifier Topology: Class D / Switching, Bridged LF and HF
- Amplifier Cooling: Passive
-
TRANSDUCER
- LF Transducer: 15-inch (381mm) cone transducer, 3-inch (76mm) voice coil, ferrite magnet
- HF Transducer: 1.75-inch (44mm) voice coil, ferrite magnet compression driver with 1-inch (25mm) exit
-
DSP FUNCTIONALITY
- System Control: high-pass & low-pass crossover filters, transducer EQ and delaycompensation,Transducer excursion, thermal, and amplifier clip protection
- User Controls: Rear panel selection of 5 DSP EQ modes: Flat, Contour, 80 Hz HP, EXT LF, User
-
WIRELESS CONTROL AND MONITORING
- Wireless Type: Bluetooth 2.0 + EDR. Class 2 RF
- Wireless Range (typical): 82 ft. (25m) clear line-of-sight
- Wireless Control App: Live Drive™ (app by Alto Professional,available on the App Store)
- Simultaneous Devices Connectable: 1 to 3 Delta Series loudspeakers
- Compatible Eireless Devices: iPhone 3GS and newer, iPad 2 and newer, iPod touch (4th generation) and newer
- iOS Version Requirements: iOS 6.1 and newer
- Wireless Control Features: Level Control (-∞ to + 10dB), Mute, Signal level metering (-70 to 0dB) DSP mode (Flat, Contour, 80 Hz HP, Ext. LF, User) Rear Panel control lockout, 3 Band EQ (Low, Mid, High), Delay, Polarity, User high pass filter, Monitoring (Limit, Peak, Fault)
-
AC LINE POWER
- Power Supply Design: Fully regulated switching, with Power Factor Correction
- Input Voltage Nominal Range: 100–240 VAC, 50/60 Hz
- Input Voltage Operating Range: 90–264 VAC, 50/60 Hz
- Voltage Selection: Automatic (self-regulating)
- Power Connector: Male IEC
- Current Requirement: 6A per system @ 120 VAC 3A per system @ 240 VAC
- AC Line Cord: 9.8 ft. (3m) IEC female, to regional AC male, 18 AWG
-
CONNECTORS AND CONTROLS
- Input Connectors: 2 x XLR/TRS combo connectors, balanced
- Input Impedance: 10 KΩ balanced, 20 KΩ unbalanced
- Input level Controls: 2 x rotary volume control
- Acoustic Polarity: Positive voltage applied to XLR Pin 2 generates positive pressure from LF driver
- Line/Mic Level Selector: Push-button switch (applies to input 1 only)
- Output Connector: Male XLR
- Output Mix Control: Switch to select output mix Pre-or Post- volume control
- Ground Switch: Push button to lift input signal input ground connection
- Bluetooth: Momentary contact to initiate Bluetooth pairing mode
- DSP Mode selection: Momentary contact to cycle through DSP EQ modes
- DSP Modes available: 5 total: Flat, Contour, 80 Hz HP, EXT LF, User
- DSP Wireless Control: Live Drive™ iOS App over Bluetooth
- Grille Logo LED On/Off Control: Recessed push-button switch
- Standby mode On/Off Control: Recessed push-button switch
- LED Indicators: Signal Present / Limit, Power / Standby
- Line input level control range: -∞ to 0dB, +4dBu nominal, +10dBu for max output
- Mic level control range: -∞ to +50dB
-
ENCLOSURE
- Construction: 15mm and 18mm premium plywood, internally-braced
- Finish: High durability textured catalyzed polyurethane, black
- Mounting: 12 x M10 female threaded screw sockets
- Handles: 3 x ergonomic handles with aluminum cross-bar
- Stand mount: 1 x 35mm female socket
- Grille: 1.2mm-thick perforated steel, black powder-coat
- Operating Temperature: -10°C to 40°C (14°F to 104°F)
- Dimensions (H x W x D) 27.0″ x 16.4″ x 17.4″ (686mm x 416mm x 443mm)
- Net Weight: 62.6 lbs (28.4 kg)
Reviews
There are no reviews yet.